Огляд датчиків удару (Дискавері 3)

After any degree of side or frontal body damage, inspect the impact crash sensors. Replace a crash sensor if there is any sign of damage.

УВАГА: Таке extra care when painting or carrying out bodywork repairs in vicinity of crash sensors. Avoid direct exposure of crash sensors or link harnesses to heat guns, welding or spraying equipment. Такий спосіб не мати сенсорного або harness коли refitting components.

Clock spring

УВАГА: Будь-який слідує за процедурою для приготування і керування годинником jar, як інтегрований в SRS repairs section. Comply with all safety and installation procedures to ensure the system functions correctly. Observe the following precautions:

• Do not unlock and rotate the clock spring when it is removed from the vehicle.
• Do not turn the road wheels when the clock spring is removed from the vehicle.
• Always ensure the clock spring is removed and installed in its central position and with the front road wheels in the straight ahead position - refer to SRS repair section for the correct removal and installation procedure.
• If a new clock spring is being installed, ensure the locking tab holding the spring's rotational position is not broken; units with a broken locking tab must not be used.

(Вихідник статті розміщено на сайті: «lrman.ru»)