Rear window washer jet (Defender 2007+)

Removal

1. Loosen and remove both rear side window trims.



2. Remove the 8 screws securing both rear handrails.

3. Remove both rear grab handles.



4. Remove the 4 decorative studs securing the upper rear trim element to the body.



5. Loosen and remove the upper rear trim piece.



6. Place a drain pan to collect any spilled liquid.

7. Disconnect the windshield washer tube from the nozzle.

8. Unscrew the nut securing the washer nozzle to the body.



9. Remove the rear window washer nozzle.

Installation

1. Install the rear window washer nozzle onto the body and secure with a nut.

2. Connect the washer tube to the nozzle.

3. Remove the drain pan.

4. Install the upper rear trim element and secure with decorative posts.

5. Install both rear handrails and secure with screws.

6. Install the rear side window trim elements.

The article is based on information from the website lrman.ru