Amplifier (antenna and TV) and independent heater (Range Rover 3)

Removal

1. Remove the hatch located in the trunk on the right side.



2. Disconnect the coaxial cable.

3. For vehicles with independent heater: Disconnect the coaxial cable of the independent heater receiver.

4. Remove the Torx screw securing the antenna amplifier.

5. Disconnect the connector and remove the amplifier.

Installation

1. Install the amplifier and connect the connector.

2. Install the amplifier and tighten the Torx mounting screw to 6 Nm.

3. Connect the coaxial cable.

4. For vehicles with independent heater: Connect the coaxial cable of the independent heater receiver.

5. Install the hatch back into place.