Car rear suspension Range Rover 3
Bleeding and filling the air suspension system with air
Bleeding air from the system 1. Bleed the system using the TestBook/T4 diagnostic tool. CAUTION: The maximum air pressure in the air suspension system is: For cars with VIN number up to 106309 - 13.7...
Bleeding air from the system 1. Bleed the system using the TestBook/T4 diagnostic tool. CAUTION: The maximum air pressure in the air suspension system is: For cars with VIN number up to 106309 - 13.7...
Wheel hub
Dismantling 1. Raise the rear of the vehicle. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the wheel. 3. Remove...
Dismantling 1. Raise the rear of the vehicle. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the wheel. 3. Remove...
Upper hinge
Dismantling 1. Raise the rear of the vehicle and install stands. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the...
Dismantling 1. Raise the rear of the vehicle and install stands. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the...
Bottom hinge
Dismantling 1. Remove the tie rod. REAR SUSPENSION, REPAIR WORK, Transverse steering rod. 2. Place a jack under the shock absorber mounting bracket to support the lower control arm. 3. Remove and...
Dismantling 1. Remove the tie rod. REAR SUSPENSION, REPAIR WORK, Transverse steering rod. 2. Place a jack under the shock absorber mounting bracket to support the lower control arm. 3. Remove and...
Wheel hub bearing
Dismantling 1. Remove the hub assembly. REAR SUSPENSION, REPAIR WORK, Hub. 2. Unscrew the 4 bolts securing the brake disc protective cover to the hub. 3. Install the LRT-60-033/5 tool on the hub...
Dismantling 1. Remove the hub assembly. REAR SUSPENSION, REPAIR WORK, Hub. 2. Unscrew the 4 bolts securing the brake disc protective cover to the hub. 3. Install the LRT-60-033/5 tool on the hub...
Pneumatic elastic element
It is not necessary to release air from the entire air suspension system; it is enough to release it only from the circuit of the replaced air element. Do not bleed the air suspension system until...
It is not necessary to release air from the entire air suspension system; it is enough to release it only from the circuit of the replaced air element. Do not bleed the air suspension system until...
Removal and installation the shock absorber
Do not bleed the air suspension system until the vehicle has been raised. It is not necessary to bleed air from the entire air suspension system; it is enough to bleed it only from the circuit...
Do not bleed the air suspension system until the vehicle has been raised. It is not necessary to bleed air from the entire air suspension system; it is enough to bleed it only from the circuit...
Anti-roll bar
Do not bleed the air suspension system until the vehicle has been raised. Dismantling 1. Remove the exhaust system. EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Exhaust system and...
Do not bleed the air suspension system until the vehicle has been raised. Dismantling 1. Remove the exhaust system. EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Exhaust system and...
Transverse steering rod
Dismantling 1. Raise the rear of the vehicle. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the wheel. 3. Fix the...
Dismantling 1. Raise the rear of the vehicle. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the wheel. 3. Fix the...
Upper control arm bushings
Dismantling 1. Remove the upper arm. REAR SUSPENSION, REPAIR WORK, Upper arm assembly. 2. Fix the upper arm in a vice. 3. Remove the bushings using tools LRT-64-024/1, LRT-64-024/2 and LRT-64-024/3....
Dismantling 1. Remove the upper arm. REAR SUSPENSION, REPAIR WORK, Upper arm assembly. 2. Fix the upper arm in a vice. 3. Remove the bushings using tools LRT-64-024/1, LRT-64-024/2 and LRT-64-024/3....
Front lower control arm bushings
The bushings of the right and left lower arms must be changed in pairs. Dismantling 1. Remove the lower arms. REAR SUSPENSION, REPAIR WORK, Lower arm assembly. 2. Remove the bushing using tools...
The bushings of the right and left lower arms must be changed in pairs. Dismantling 1. Remove the lower arms. REAR SUSPENSION, REPAIR WORK, Lower arm assembly. 2. Remove the bushing using tools...
Rear lower control arm bushings
The bushings of the right and left lower arms must be changed in pairs. Dismantling 1. Remove the lower arms. REAR SUSPENSION, REPAIR WORK, Lower arm assembly. 2. Remove the bushing using tools...
The bushings of the right and left lower arms must be changed in pairs. Dismantling 1. Remove the lower arms. REAR SUSPENSION, REPAIR WORK, Lower arm assembly. 2. Remove the bushing using tools...
Anti-roll bar struts
Dismantling 1. Raise the rear of the vehicle. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the wheel. 3. Unscrew...
Dismantling 1. Raise the rear of the vehicle. CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands. 2. Remove the wheel. 3. Unscrew...
Lower control arm assembly
Do not bleed the air suspension system until the vehicle has been raised. Dismantling 1. Raise the rear of the vehicle and install stands. CAUTION: Do not work under a vehicle supported solely by a...
Do not bleed the air suspension system until the vehicle has been raised. Dismantling 1. Raise the rear of the vehicle and install stands. CAUTION: Do not work under a vehicle supported solely by a...
Upper control arm assembly
Do not bleed the air suspension system until the vehicle has been raised. Dismantling 1. Remove the exhaust system. EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Exhaust system and...
Do not bleed the air suspension system until the vehicle has been raised. Dismantling 1. Remove the exhaust system. EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Exhaust system and...
Rear subframe bushings
The bushings must be replaced in pairs - front left and right, or rear left and right. (and not one by one or diagonally). Dismantling 1. Place the vehicle on a lift. 2. Raise the rear of the...
The bushings must be replaced in pairs - front left and right, or rear left and right. (and not one by one or diagonally). Dismantling 1. Place the vehicle on a lift. 2. Raise the rear of the...
Body height sensor
On vehicles equipped with xenon headlights, the front and rear height sensors, which are located on the right side of the vehicle, are different from those installed on vehicles with standard...
On vehicles equipped with xenon headlights, the front and rear height sensors, which are located on the right side of the vehicle, are different from those installed on vehicles with standard...
Bypass valve
Do not bleed the air suspension system until the vehicle has been raised. When disconnecting a Voss type nipple from any air suspension component, do not remove it from the air hose being...
Do not bleed the air suspension system until the vehicle has been raised. When disconnecting a Voss type nipple from any air suspension component, do not remove it from the air hose being...
Safety valve
Dismantling 1. Open both parts of the cargo compartment door, release the fasteners and fold the curtain. 2. Release the cover covering the spare wheel from its fastening and remove it from the...
Dismantling 1. Open both parts of the cargo compartment door, release the fasteners and fold the curtain. 2. Release the cover covering the spare wheel from its fastening and remove it from the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Chassis: Rear axle shafts Land Rover Freelander 2 (2006-2014)
• Chassis: Rear suspension Land Rover Discovery 3 (2004-2009)
• Chassis: Rear drive axle Land Rover Defender 2007+ (2007-2016)
• Chassis: Rear axle shafts Land Rover Freelander 2 (2006-2014)
• Chassis: Rear suspension Land Rover Discovery 3 (2004-2009)
• Chassis: Rear drive axle Land Rover Defender 2007+ (2007-2016)