Front seat back upholstery (Defender 2007+)

Removal

1. Remove the front seat headrest. Release the two clips.



2. Remove the front seat headrest guides. Turn the front seat headrest guides 90 degrees counterclockwise.



3. Remove the lower trim panel of the front seat.



4. Remove the front seat back trim. Remove and discard the 11 wire rings.

Installation

1.

CAUTION: Care must be taken when installing these wire rings; failure to follow these instructions may result in damage to the vehicle.

NOTE: Use round nose pliers to close the wire rings. Do not use any other tools. It is required to close the wire rings with overlapping as shown in the picture.

Install the elements back in place in reverse order.