| Threaded connection | In the SI system | In pounds feet |
| Bolts securing the shoe guide to the steering knuckle | 110 Nm | 81 lb ft |
| Bolts securing the brake shoe guide to the rear hub housing | 65 Nm | 48 ft·lbs |
| Bolts for fastening the bracket and cover to the booster pump | 8 Nm | 6 ft·lbs |
| Bolt for fastening the booster pump | 8 Nm | 6 ft·lbs |
| Fastening nut for the pressure pipe of the booster pump | 14 Nm | 10 ft·lbs |
| Nut for fastening the filling pipe to the booster pump | 14 Nm | 10 ft·lbs |
| Nut for fastening the alarm siren to the bracket | 8 Nm | 6 ft·lbs |
| Master Cylinder Mounting Nuts + | 26 Nm | 19 ft·lbs |
| Nuts securing brake pipes to master cylinder | 14 Nm | 10 ft·lbs |
| Bolts and nuts for fastening the return spring bracket to the pedal block | 10 Nm | 7 ft·lbs |
| Nuts securing the parking brake lever to the bracket | 21 Nm | 15 ft·lbs |
| Brake Bleeding Nipples | 14 Nm | 10 ft·lbs |
| Caliper guide pins | 33 Nm | 24 ft·lbs |
| Vacuum pump mounting bolts + | 22 Nm | 16 ft·lbs |
| Allen screw for mounting the wheel speed sensor | 8 Nm | 6 ft·lbs |
| Pressure modulator bracket mounting bolts | 8 Nm | 6 ft·lbs |
| Nuts for fastening pipelines to the pressure modulator | 18 Nm | 13 ft·lbs |
| Pressure sensor to the modulator body | 20 Nm | 15 ft·lbs |
| DSC sensor mounting bolts to support bracket | 8 Nm | 6 ft·lbs |
| Bolt for fastening the cable sheath to the brake shield | 8 Nm | 6 ft·lbs |
| Cable sheath mounting bracket bolt | 6 Nm | 8.8 ft·lbs |
| Nuts for fastening the vacuum booster to the bracket + | 26 Nm | 19 ft·lbs |
| Torx screws for mounting the electronic unit of the ABS system | 2.9 Nm | 2.2 ft·lbs |
| DSC sensor mounting bolts | 8 Nm | 6 ft·lbs |
+ When reassembling, it is necessary to replace the bolts and nuts with new ones
Comments on this article