Threaded connection | In the SI system | In lb ft |
coolant temperature sensor (ECT) | 15 Nm | 11 lb ft |
Allen screw for crankshaft position sensor (CKP) | 8 Nm | 6 lb ft |
Hexagon socket screw for mounting the camshaft position sensor (CWP) | 8 Nm | 6 lb ft |
Air filter cover hexagon socket screws | 8 Nm | 6 lb ft |
Screw with an internal hexagon of fastening of a pedal of an accelerator | 10 Nm | 7 lb ft |
Fuel temperature sensor in the system (EFT) | 13 Nm | 10 lb ft |
Torx bolt of fastening of the gauge of pressure of fuel | 6 Nm | 4.4 lb ft |
Fuel pressure sensor in the accumulator | 38 Nm | 28 lb ft |
Torx screws securing the combined mass flow and air temperature sensor in the intake manifold (MAF/IAT) | 6 Nm | 4.4 lb ft |
Nuts of fastening of the fuel pump of a high pressure | 24 Nm | 18 lb ft |
High pressure pipelines | 20 Nm | 18 lb ft |
Nut of fastening of an asterisk of the fuel pump of a high pressure | 65 Nm | 48 lb ft |
Screws with an internal hexagon for fastening the cover of the hermetic housing for accommodating the electronic units of the control system | 2 Nm | 1.5 lb ft |
Turbocharger oil drain pipe bolts | 10 Nm | 7 lb ft |
Bolt of fastening of the pressure head pipeline for turbocharger lubrication | 25 Nm | 18 lb ft |
Turbocharger mounting bolts | 50 Nm | 37 lb ft |
Bolts of an arm of fastening of a turbocharger | 25 Nm | 18 lb ft |
Turbocharger screws with hexagon socket | 8 Nm | 6 lb ft |
Hose from turbocharger to charge air cooler | 6 Nm | 4.4 lb ft |
Wait 15 minutes and retighten the hose clamp screw | 6 Nm | 4.4 lb ft |
Boost control solenoid valve nuts | 10 Nm | 7 lb ft |
Vacuum tank nut | 10 Nm | 7 lb ft |
Boost pressure sensor mounting bolt | 8 Nm | 6 lb ft |
Bolts of fastening of a regulator of pressure of fuel | 10 Nm | 7 lb ft |
Bolts for supplying recirculated exhaust gases to the cooler | 3 Nm | 2.2 lb ft |
Injector pins | 10 Nm | 7 lb ft |
Injector mounting bracket nuts | 10 Nm | 7 lb ft |
Injector wiring harness screws | 2 Nm | 1.5 lb ft |
Nuts of fastening of pipelines of a high pressure to atomizers | 20 Nm | 15 lb ft |
glow plugs | 20 Nm | 15 lb ft |
Glow plug wire nut | 6 Nm | 4.4 lb ft |
TD V6 engine management system (Range Rover 3)
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Previous articles
Current article
TD V6 engine management system
Next articles
V8 engine management system
Fuel supply system
Cooling system
Exhaust and intake manifolds and exhaust system
Transfer case
Automatic transmission TD V6
V8 automatic transmission
Cardan shafts
Front and rear gearboxes
Steering
Front suspension
Rear suspension
Brake system
Airbag system
Car body
Climate control
Electrical equipment
Fuel supply system
Cooling system
Exhaust and intake manifolds and exhaust system
Transfer case
Automatic transmission TD V6
V8 automatic transmission
Cardan shafts
Front and rear gearboxes
Steering
Front suspension
Rear suspension
Brake system
Airbag system
Car body
Climate control
Electrical equipment
Similar articles from Land Rover repair manuals:
• Diesel engine management system — EDC Freelander 1 (1997-2006)
• Hydraulic brake system Freelander 2 (2006-2014)
• Shaft of the dynamic balancing system of the engine Discovery 3 (2004-2009)
• Engine compartment Defender 2007+ (2007-2016)
• Diesel engine management system — EDC Freelander 1 (1997-2006)
• Hydraulic brake system Freelander 2 (2006-2014)
• Shaft of the dynamic balancing system of the engine Discovery 3 (2004-2009)
• Engine compartment Defender 2007+ (2007-2016)
No comments yet
Comments on this article