| Threaded connection | In the SI system | In pounds feet |
| Drain plug + | 20 Nm | 15 ft·lbs |
| Filler/inspection hole plug + | 20 Nm | 15 ft·lbs |
| Automatic transmission selector cable housing fastening nut | 15 Nm | 11 ft·lbs |
| Selector mechanism mounting nuts | 25 Nm | 18 ft·lbs |
| Nut securing the selector shaft lever to the selector shaft | 10 Nm | 7 ft·lbs |
| Spring retainer bolts | 10 Nm | 7 ft·lbs |
| Bolts for fastening the cable bracket to the automatic transmission housing | 10 Nm | 7 ft·lbs |
| Torx bolt for mounting the secondary shaft angular velocity sensor of the automatic transmission | 10 Nm | 7 ft·lbs |
| Torx bolt for mounting the automatic transmission input shaft speed sensor | 10 Nm | 7 ft·lbs |
| Torx bolts for mounting automatic transmission to engine | ||
| M8 | 25 Nm | 18 ft·lbs |
| M12 | 72 Nm | 53 ft·lbs |
| Automatic transmission protective shield mounting torx bolts | 25 Nm | 18 ft·lbs |
| Bolt for fastening heat exchanger tubes to gearbox | 25 Nm | 18 ft·lbs |
| Bolt for fastening the spacer to the automatic transmission housing | 10 Nm | 7 ft·lbs |
| Torque converter to drive flange mounting bolts (engine flywheel) | 45 Nm | 33 ft·lbs |
| Crossmember mounting bolts | 68 Nm | 50 ft·lbs |
| Nut for fastening the automatic transmission support to the crossmember | 100 Nm | 74 ft·lbs |
| Upper Torx Converter Housing Bolts | 72 Nm | 53 ft·lbs |
| Bolts for fastening the extension of the automatic transmission housing | 10 Nm | 7 ft·lbs |
| Oil pan mounting bolts | 10 Nm | 7 ft·lbs |
| Automatic transmission heat exchanger mounting bolts | 10 Nm | 7 ft·lbs |
| Bolts for fastening tubes to the automatic transmission heat exchanger | 10 Nm | 7 ft·lbs |
| Valve block mounting bolts | 10 Nm | 7 ft·lbs |
+ When reassembling, it is necessary to replace the plug with a new one
[The original text was published on the website: www.lrman.ru]
Comments on this article