Rear gear
Threaded connection | In the SI system | In lb ft |
drain plug | 65 Nm | 48 lb ft |
Filler/Inspection Plug | 65 Nm | 48 lb ft |
Fastening the flange of the rear propeller shaft to the flange of the rear gearbox | 70 Nm | 52 lb ft |
Nuts of fastening of the case of the outboard bearing of the rear cardan shaft | 21 Nm | 15 lb ft |
Bolts of fastening of a back cover | 45 Nm | 33 lb ft |
Mounting the rear gearbox to the rear subframe +: | ||
bolts | 100 Nm | 74 lb ft |
nuts | 165 Nm | 121 lb ft |
+ When reassembling, it is necessary to replace the bolts and nuts with new ones
Front gear
Threaded connection | In the SI system | In lb ft |
Drain Plug+ | 65 Nm | 48 lb ft |
Filler/Inspection Plug+ | 35 Nm | 26 lb ft |
Bolts of fastening of a forward reducer | 102 Nm | 75 lb ft |
+ Lubricate with sealant, Item number STC 50552 for threaded connections
Comments on this article