| Threaded connection | In the SI system | In pounds feet |
| Bolts for fastening the front subframe to the body +: | ||
| First method - For all bolts | 165 Nm | 122 ft·lbs |
| Second method - For rear bolts | Turn another 90° | Turn another 90° |
| Bolt for fastening the front subframe to the body crossmember | 132.5 Nm | 97 ft·lbs |
| Anti-roll bar heat shield mounting nuts | 2.5 Nm | 1.8 ft·lbs |
| Stabilizer strut mounting nuts | 100 Nm | 74 ft·lbs |
| Wheel mounting nuts | 140 Nm | 103 ft·lbs |
| Nuts for the anti-roll bar mounting brackets | 19 Nm | 14 ft·lbs |
| Ball joint mounting nuts + | 60 Nm | 44 ft·lbs |
| Nut for fastening the strut to the ball joint of the steering knuckle | 80 Nm | 59 ft·lbs |
| Lower arm ball joint to steering knuckle mounting nut | 80 Nm | 59 ft·lbs |
| Bolt for fastening the stretcher to the subframe bracket: | ||
| First appointment | 165 Nm | 121 lb ft |
| Second reception | Turn another 90° | Turn another 90° |
| Lower arm to subframe bracket mounting bolt: | ||
| First appointment | 165 Nm | 121 lb ft |
| Second reception | Turn another 90° | Turn another 90° |
| Nuts for fastening the telescopic stand to the upper support | 56 Nm | 42 ft·lbs |
| Nut for fastening the air line to the air spring | 3.5 Nm | 2.6 ft·lbs |
| Steering tie rod ball joint to steering arm mounting nut | 80 Nm | 59 ft·lbs |
| Bolts securing the shoe guide to the steering knuckle | 110 Nm | 81 lb ft |
| Bolts for fastening the steering knuckle to the telescopic strut bracket | 250 Nm | 184 ft·lbs |
| Body position sensor rod to lower suspension arm mounting nut | 8 Nm | 6 ft·lbs |
| Allen screw for mounting the wheel speed sensor | 8 Nm | 6 ft·lbs |
| Hub mounting nut + | 420 Nm | 311 ft·lbs |
| Allen screws for mounting the body position sensor to the body bracket | 5 Nm | 3.7 ft·lbs |
| Nut securing the rod to the body position sensor | 8 Nm | 6 ft·lbs |
| Bolts for fastening the air receiver to the body | 8 Nm | 6 ft·lbs |
| Bolts for fastening the compressor module to the body | 8 Nm | 6 ft·lbs |
| Nuts for fastening air pipes to the interwheel electromagnetic valve | 3.5 Nm | 2.6 ft·lbs |
+ When reassembling, it is necessary to replace the bolts and nuts with new ones
Comments on this article