Rear suspension (Range Rover 3)

Threaded connection	In the SI system	In pounds feet
Bolt securing the lower arm to the rear hub housing +	250 Nm	184 ft·lbs
Hub mounting nut +	420 Nm	311 ft·lbs
Bolt securing upper arm to rear hub housing +	165 Nm	121 lb ft
Hexagon socket head bolt for securing brake hose to upper arm	5 Nm	3.7 ft·lbs
Air line nut	3.5 Nm	2.6 ft·lbs
Bolt securing shock absorber eye to lower rear suspension arm +	110 Nm	81 lb ft
Upper shock absorber rod mounting nut	27 Nm	20 ft·lbs
Upper shock absorber support mounting nuts +	56 Nm	40 ft·lbs
Anti-roll bar bracket mounting bolts +	38 Nm	28 ft·lbs
Stabilizer strut mounting nuts +	10 Nm	74 ft·lbs
Ball joint mounting nut for rear wheel alignment control rod +	165 Nm	121 lb ft
Body position sensor rod to lower suspension arm mounting nut	19 Nm	14 ft·lbs
Bolt for fastening the tie rod for adjusting the rear wheel alignment to the subframe bracket +	165 Nm	121 lb ft
Stabilizer strut mounting nuts +	10 Nm	74 ft·lbs
Bolts for fastening the lower arm to the subframe brackets +	165 Nm	121 lb ft
Bolts for fastening the upper arm to the subframe brackets +	165 Nm	121 lb ft
Rear subframe to body mounting bolts +	165 Nm	122 ft·lbs
Allen screws for mounting the body position sensor to the body bracket	5 Nm	3.7 ft·lbs

+ When reassembling, it is necessary to replace the bolts and nuts with new ones

The original source of the article is the website (www.LRman.ru)