Exhaust and intake manifolds and exhaust system (Range Rover 3)

Exhaust and intake manifolds and exhaust system Td6

Threaded connection	In the SI system	In pounds feet
Nuts for fastening the exhaust system suspension brackets to the body *	25 Nm	18 ft·lbs
Nuts for fastening the exhaust system flange to the intake pipe flange +	45 Nm	33 ft·lbs
Nuts securing the intake pipe flange to the turbocharger	42 Nm	31 ft·lbs
Intake manifold:
Bolts	10 Nm	7 ft·lbs
Nuts	15 Nm	11 ft·lbs
Rear repair clamp tie nuts	48 Nm	35 ft·lbs
Front repair clamp tie nuts	25 Nm	18 ft·lbs
Nuts for fastening the middle bracket of the exhaust system to the body	68 Nm	50 ft·lbs
Vacuum Pipe Bracket Mounting Bolt	6 Nm	4.4 ft·lbs
Oil dipstick neck mounting bolt	6 Nm	4.4 ft·lbs
Exhaust manifold nuts	24 Nm	18 ft·lbs

+ When reassembling, it is necessary to replace the bolts and nuts with new ones
* For rear brackets only

V8 Intake and Exhaust Manifolds and Exhaust System

Threaded connection	In the SI system	In pounds feet
Nuts for fastening the exhaust system suspension brackets to the body	25 Nm	18 ft·lbs
Nuts for fastening the exhaust system flange to the exhaust manifold flange +	45 Nm	33 ft·lbs
Front repair clamp tie nuts	48 Nm	35 ft·lbs
Rear repair clamp tie nuts	48 Nm	35 ft·lbs
Torx screws securing the rear cover to the intake manifold	10 Nm	7 ft·lbs
Intake manifold bracket mounting bolts	10 Nm	7 ft·lbs
Torx screws securing the front cover to the intake manifold	10 No.	7 ft·lbs
Intake Manifold Fastening Nuts	15 Nm	11 ft·lbs
Exhaust manifold nuts	23 Nm	17 ft·lbs

+ When reassembling, it is necessary to replace the nuts with new ones