| Threaded connection | In the SI system | In pounds feet |
| Drain plug | 25 Nm | 18 ft·lbs |
| Filler/inspection hole plug | 25 Nm | 18 ft·lbs |
| Torx screws for mounting the inertial damper | 23 Nm | 17 ft·lbs |
| Torx bolts for fastening the transfer case to the automatic transmission | 43 Nm | 32 ft·lbs |
| Bolt and nut for fastening the support to the crossbar | 100 Nm | 74 ft·lbs |
| Bolts for fastening the connector bracket to the transfer case | 25 Nm | 18 ft·lbs |
| Nuts for fastening front and rear flanges for fastening cardan shafts + | 100 Nm | 74 ft·lbs |
| Transfer Case Electronic Control Unit Fuse Nuts | 6 Nm | 4.4 ft·lbs |
+ When reassembling, it is necessary to replace the nuts with new ones
Comments on this article