GENERAL INFORMATION, Precautions when working with electrical equipment.
Removing
1. Disconnect "mass" battery wire.
2. Remove a noise-insulating casing of the engine.
ENGINE TD6, REPAIR WORK, Soundproof engine cover.
3. Remove the air cleaner element
ENGINE MANAGEMENT Td6:, REPAIR WORK, Air cleaner element.
4. Remove the soundproof cover.
5. Disconnect the connectors from the injectors.
6. Remove 3 screws and set aside the injector harnesses.
7. Remove the 4 Allen screws and remove the valve and filter. Remove and discard the old valve and filter seal.
Installation
1. Clean mating surfaces of valve and filter.
2. Install new valve and filter seals. Tighten the hexagon socket bolts to 8 Nm.
3. Reinstall the injector wiring harnesses and tighten the fastening screws to 2 Nm.
4. Connect harness connectors to injectors.
5. Install the soundproof cover.
6. Install the air cleaner element.
ENGINE MANAGEMENT Td6:, REPAIR WORK, Air cleaner element.
7. Replace the engine soundproof cover.
TD6 ENGINE, Intake and exhaust camshafts, Engine noise cover.
8. Connect "mass" battery wire.
Comments on this article