EGR solenoid valve (Range Rover 3)

Before disconnecting the battery, carefully read the "Disconnecting the Battery" section and follow all instructions therein.

GENERAL INFORMATION, Precautions when working with electrical equipment.

Removal

1. Disconnect the ground cable from the battery.

2. Remove the intake manifold gaskets.

EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Intake manifold gaskets.

3. Disconnect the connector from the EGR solenoid valve.

4. Unscrew the 2 nuts and remove the EGR solenoid valve from the mounting bracket.

5. Mark and disconnect the vacuum hoses from the valve.

6. Remove the EGR solenoid valve.

Installation

1. Connect the vacuum hoses to the EGR solenoid valve.

2. Install the EGR solenoid valve to the bracket and tighten the mounting nuts to 10 N·m (7 ft·lbs).

3. Connect the connector to the EGR solenoid valve.

4. Install the intake manifold gaskets.

EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Intake manifold gaskets.

The original text was published on the website (www.LRman.ru)

5. Connect the ground cable of the battery.