GENERAL INFORMATION, Precautions when working with electrical equipment.
Removing
1. Place the car on a lift.
2. Disconnect "mass" battery wire.
3. Relieve residual pressure in the fuel supply system.
V8 FUEL SUPPLY, ADJUSTMENTS AND MAINTENANCE, Relief Pressure Relief.
WARNING: The Residual Pressure Relief Procedure must be followed whenever any system components need to be disconnected. Residual pressure exists in the system even some time after the ignition is switched off.
4. Turn away 2 bolts fastening a protective cover of the fuel filter, remove a cover.
5. Remove 2 bolts securing the fuel filter to the mounting brackets, bend the mounting brackets.
6. Prepare a suitable container for draining the remaining fuel.
7. Disconnect from the fuel filter 3 fuel hoses and 1 control pipeline, remove the fuel filter.
WARNING: Fuel leakage is inevitable during this operation. Take safety precautions to prevent fire or explosion.
Installation
1. Connect the fuel hoses to the fuel filter.
2. Fix the fuel filter with fastening bolts.
3. Connect "mass" battery wire.
4. Start the engine, check for leaks from the fuel filter and hoses.
5. Drain the fuel from the container and prepare it for further use.
6. Replace the protective cover and secure with screws.
Comments on this article