GENERAL INFORMATION, Precautions when working with electrical equipment.
Installation
1. Disconnect "mass" battery wire.
2. Remove a noise-insulating casing of the engine.
V8 engine, REPAIR WORK, Engine soundproofing cover.
3. Remove the protective cap from the Schroeder valve located on the fuel rail.
WARNING: Fuel leakage is inevitable during this operation. Take safety precautions to prevent fire or explosion.
4. Attach tool LRT-19-006 with hose to Schroeder valve.
5. Open the faucet of LRT-19-006. Drain excess fuel from the system into a suitable container.
WARNING: Fuel vapors are highly flammable, and in an enclosed area they are also toxic and explosive. There must be a fire extinguisher in the room where fuel is removed from the fuel tank (foam, carbon dioxide, gas or powder).
Removing
1. Close the valve of LRT-19-006.
2. Remove hose from LRT-19-006.
3. Remove tool LRT-19-006 from Schrader valve.
4. Put the protective cap on the Schrader valve.
5. Place the fuel drain tray on the workbench.
6. Drain the fuel from the tray and prepare it for further use.
7. Reinstall the acoustic cover.
V8 engine, REPAIR WORK, Engine soundproofing cover.
8. Connect " mass" battery wire.
Comments on this article