Manual Transmission Specifications (Defender 2007+)

Lubricants, working fluids, sealants and adhesives

Element	Technical specifications
Transmission oil for manual transmission	WSD-M2C200-C
Brake fluid Super Dot 4	ESD-M6C57-A
Sealant	WSS-M2G348-A10
Grease	ESD-M1C220-A

Filling volume

Filling volume	л
MT82 Gearbox - Initial Filling	2,4
Gearbox MT82 - Refilling during maintenance	2,2

Tightening torques

Description	Nm	lb-ft
Shift fork mounting nut	12	9
Clutch slave cylinder mounting bolts	11	8
Reverse light switch	20	15
Gearbox Console Housing Bolts	25	18
Transfer case bolts	45	33
Gearbox mounting bolts	40	30
Right gearbox support nut*	30	22
Bolts of the right support of the gearbox +	63	46
Left gearbox support nut*	30	22
Left Gearbox Mount Bolts +	63	46
Starter mounting bolts	35	26
Fuel line support bracket nut	9	7
Clutch slave cylinder hose from mounting bracket nut	25	18
Transmission Wiring Harness Bracket Nut and Bolt	47	35
Transfer case breather tube	15	11
Right bolt securing ground cables to transfer case	9	7
Left nut securing the ground cable to the transfer case	45	33
Nut securing the rear section of the propeller shaft to the transfer case	50	37
Rear pipe to intermediate pipe fastening nut	25	18

* When reusing nuts on vehicles manufactured before VIN732932, tighten them to 48 Nm. When replacing nuts, tighten them to 30 Nm.

+ When reusing bolts on vehicles manufactured before VIN732932, tighten them to 85 Nm. When replacing bolts, tighten them to 63 Nm.

Tightening torques for external controls

Description	Nm	lb-ft
Differential lock mechanism adjusting nut	25	18
Gear Shift Lever Bolts	25	18
High/Low Range Selector Lever Screws	7	5

The source of the article is located on the website (lrman.ru)