GENERAL INFORMATION, Precautions when working with electrical equipment.
Removing
1. Disconnect "mass" battery wire.
2. Remove the glove box.
CAR INTERIOR PARTS, REPAIR WORKS, Glove box.
3. Remember the installation position and disconnect 8 pads from the fuse box.
4. Remove the 4 Torx screws securing the fuse box and move it aside.
5. Remove the fuse link top cover.
6. Loosen the fastening nut "positive" battery wires to the fuse box. Move the wire aside.
7. Turn the fuse box over and remove the lower fuse link cover.
8. Remember the installation position and unscrew the nuts that secure the wires to the fuse links. Move the wires aside.
9. Remove the fuse block.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
10. Remove the fuses and relays from the fuse box.
Installation
1. Install fuses and relays in the fuse box.
2. Connect the fusible link wires, install the nuts and tighten them. Tightening torque - 8 Nm.
3. Replace the lower fusible link cover.
4. Attach "positive" battery cable to the fuse box, install the nuts and tighten them. Tightening torque - 15 Nm.
5. Replace the top fusible link cover.
6. Install the fuse box and secure it with screws.
7. Connect the blocks to the fuse box.
8. Install the glove box.
CAR INTERIOR PARTS, REPAIR WORKS, Glove box.
9. Connect "mass" battery wire.
Comments on this article