Adjusting the headlight beams (Range Rover 3)

Examination

1. Make sure the vehicle's air suspension is in the standard position.

2. Install and align the headlight adjuster with the headlight.

3. Turn on the headlights. The headlights should be adjusted so that the light beams are parallel to each other and 1.4% below the horizontal position.

Adjustment

1. Adjust the headlight position using a 6mm Allen key.

Original article on the web portal: www.LRman.ru



2. Rotate the Allen screw "A" to adjust the vertical plane.

3. Rotate the Allen screw "B" to adjust the horizontal plane.

4. Align the headlight adjuster with the second headlight.

5. Adjust the second headlight as described above.

6. Turn off the headlights and remove the headlight adjuster.