Turn signal repeater (Range Rover 3)

Removal

1. Push the turn signal repeater towards the front of the vehicle. Loosen the latches and release the lamp from the fender.

2. Disconnect the connector with the electrical cable. NOTE: If disassembly was performed only to provide access to other system components, no further disassembly operations should be performed.

3. Remove the cartridge from the repeater housing.

4. Remove the lamp from the socket.

Installation

1. Install the lamp and socket into the repeater housing.

Details can be found on the website: LRman.ru

2. Attach the shoe.

3. Install and secure the turn signal repeater.