Dismantling
1. Remove the front bumper assembly.
EXTERIOR PARTS, REPAIR WORKS, Front bumper assembly.
2. Remove the headlamp assembly.
LIGHTING, REPAIR WORKS, Headlight assembly.
3. Disconnect the block and tube from the headlamp cleaner motor.
4. Disconnect the wiring harness from the front panel.
5. Turn away 3 bolts of fastening of an arm of a bumper and remove an arm.
6. Turn away 2 bolts of an arm of fastening of the electric motor. Remove the bracket together with the motor.
7. Turn away 2 screws and take the electric motor from an arm.
Installation
1. Position the wiper motor in the bracket and secure with screws.
2. Install the motor assembly in place. Fit the bolts and tighten them with a torque of 10 Nm.
3. Establish an arm of fastening of a bumper, establish and tighten bolts with the moment of 10 Нм.
4. Attach the wiring harness to the front panel. Connect the block and tube to the electric motor.
5. Install the headlamp assembly.
LIGHTING, REPAIR WORKS, Headlight assembly.
6. Install the front bumper.
EXTERIOR PARTS, REPAIR WORKS, Front bumper assembly.
Comments on this article