Removing
1. Remove the lower windshield trim.
EXTERIOR PARTS, REPAIR WORKS, Bottom trim - windshield.
2. Remove the air tube.
HEATING AND VENTILATION, REPAIR WORKS, Air intake box.
3. Disconnect the shoe from the cleaner motor.
4. Remove the 5 Torx bolts securing the wiper linkage and remove the linkage assembly.
Installation
1. Position the motor linkage correctly. Install the bolts and tighten them to 10 Nm.
2. Connect the shoe to the cleaner motor.
3. Replace the air tube.
HEATING AND VENTILATION, REPAIR WORKS, Air intake box.
4. Reinstall the windshield trim.
EXTERIOR PARTS, REPAIR WORKS, Bottom trim - windshield.
Comments on this article