Removing
1. Remove the front shock absorber.
For more information, see chapter: Front shock absorber (204-01 Front suspension, Removal and installation).
CAUTION: Avoid excessive deformation of the brake hoses. If necessary, loosen the locknuts on the hose connections to allow the hoses to follow the axle.
2. Lower the axle just enough to release the spring.
3. Remove the spring.
4. Remove a ring of fastening of an arm of the shock-absorber.
Installation
1. Establish a ring of fastening of an arm of the shock-absorber. Fix it with a nut.
2. Install the spring and raise the bridge.
3. Turn away a nut of fastening of a fixing ring.
4. Install the front shock absorber.
For more information, see chapter: Front shock absorber (204-01 Front suspension, Removed and installed).
Comments on this article