Removing
1.
WARNING: It is forbidden to carry out work on a vehicle standing on only one jack. Always support the vehicle with jack stands. Failure to follow this instruction may result in injury.
Raise and support the vehicle.
2. Disconnect the transfer box low range indicator switch electrical connector.
- 1. Disconnect the electrical connector.
- 2. Release the electrical connector from the bracket.
3. Remove the transfer box low range indicator switch. Remove and discard the sealing washer.
Installation
1. Install the elements in the reverse order of disassembly.
- Install a new sealing washer.
- Tighten (tightening torque 24 Nm).
Comments on this article