Decorative trim for the rear E-pillar (Range Rover 3)

Dismantling

1. Remove the 4 fasteners securing the decorative trim to the E-pillar.

2. Release the 4 latches and remove the decorative trim.

3. Separate and discard the clips from the trim.

4. Remove the retainer bushings from the E-pillar and discard them.

Assembly

1. Install new retainer bushings into the E-pillar.

2. Install new clips onto the trim panel.

3. Install the decorative trim and secure it with clips and latches.

[The article was copied from a resource: LRMAN.ru]