Outside rear view mirror (Range Rover 3)

Dismantling

1. Remove the front door panel.

DOORS, REPAIR WORK, Door panel - front door.

2. Release the lower edge of the door trim from the retainer and move it to the side. Remove the foam seal and release the cable.

The full version is available on the website: www.lrman.ru



3. Remove the 3 Torx screws securing the mirror to the door, pull out the cable and remove the rear view mirror assembly.

4. Remove the foam pad from the hinge panel.

Assembly

1. Install the foam pad onto the hinge panel.

2. Route the mirror cable through the panel, position the mirror, install and tighten the Torx bolts to 10 Nm.

3. Install the decorative trim on the door and secure it with the clamp.



4. Install the front door panel.

DOORS, REPAIR WORK, Door panel - front door.