Front wheel arch liner (Range Rover 3)

Dismantling

1. Raise the front of the vehicle.

CAUTION: Do not work under a vehicle supported solely by a jack or lift. Always support the vehicle with safety stands.

2. Remove the wheel.



3. Unscrew the 3 plastic nuts securing the wheel arch liner.

4. Unscrew the 11 mudguard liner mounting screws, which have a hexagonal head.

5. Remove the 2 screws securing the wheel arch liner to the threshold and to the bumper extension.

6. Loosen and remove the wheel arch liner.

Assembly

1. Install the fender liner.

2. Install and tighten the plastic nuts onto the studs.

[The original article is located on LRMAN.ru]

3. Install and tighten the screws securing the mudguard to the wing and bumper.

4. Replace the wheel and tighten the nuts to a torque of 140 Nm.

5. Remove the supports and lower the vehicle.