Rear bumper beam (Range Rover 3)

Dismantling

1. Open both parts of the cargo compartment door, release the fasteners and fold the shelf.

2. Remove the rear bumper.

EXTERIOR PARTS, REPAIR WORK, Rear bumper.

3. Lift and secure the spare wheel cover.

4. Loosen and remove the left and right side panels of the luggage compartment.

5. Loosen the Allen screws securing the left and right luggage securing rings and remove them.

6. Remove the 2 rotary fasteners securing the rear panels on the left and right sides.

7. Locate the straps and remove the covers of the left and right cargo compartments.

8. Remove the pin and the rotary retainer securing the rear panels on the left and right sides of the vehicle.

9. Remove the warning triangle.

10. Loosen the lock and remove the wheel lock wedge and tool bag.

11. Remove the right storage box from the luggage compartment.

12. Unscrew the 3 plastic nuts and remove the 2 threaded fasteners of the right support of the glove box and remove the support.

13. Unscrew the 3 plastic nuts securing the left glove compartment support and remove the support.

14. Unscrew the 8 nuts securing the rear bumper beam and remove the beam.

NOTE: If disassembly was performed only to provide access to other system components, no further disassembly operations should be performed.

15. Remove the 8 fasteners from the rear bumper beam.

Assembly

1. Install 8 clips to the rear bumper beam.

2. Install the rear bumper beam, screw on the nuts and tighten them to a torque of 45 Nm.

3. Install the left support of the glove box and secure with plastic nuts.

4. Install the right support and secure it with 2 clamps and 3 plastic nuts.

5. Install the storage box on the luggage compartment support.

6. Place the wheel locking wedge and tool bag.

7. Install and secure the warning triangle.

8. Install the left and right luggage compartment panels and secure them with the rotary fasteners.

9. Install the load securing ring, find the hook. Tighten the screw with a torque of 25 N·m.

10. Position and secure the lid.

11. Install the left and right luggage compartment panels.

12. Close the spare wheel cover and install the luggage compartment shelf.

13. Reinstall the rear bumper.