Dismantling
1. Remove a decorative overlay of the top part of a door of a luggage space.
DOORS, REPAIRS, Panel overlay - upper tailgate.
2. Turn away 3 bolts of fastening of a spoiler to a tailgate.
3. Disconnect the block from the wiring harness.
4. Close the upper tailgate.
5. Slide the spoiler towards the rear of the vehicle and release it from the clips. Loosen upper brake light wiring harness (CHMSL) on the tailgate and remove the spoiler.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
6. Turn away 4 screws of fastening of a lantern of the top brake light to a back door, separate a plait of wires from a spoiler and remove a lantern.
Assembly
1. Install the upper brake light and wiring harness into the spoiler, secure with screws.
2. Install and fix the spoiler on the tailgate, tighten the screws with a torque of 10 Nm.
3. Open the upper tailgate.
4. Attach the cable block.
5. Establish the top overlay of a door of a luggage space.
DOORS, REPAIRS, Panel overlay - upper tailgate.
Comments on this article