Dismantling
1. Remove glass of an external mirror.
EXTERIOR PARTS, REPAIRS, Mirror glass.
2. Remove the rear view mirror.
EXTERIOR PARTS, REPAIR WORKS, Rear-view mirror - exterior.
3. Remove an overlay from the hinge of a mirror.
4. Remove the 4 Torx screws securing the mirror to the hinge casting.
5. Remove the toothed washer that secures the mirror cables to the hinge plate.
6. Remove the cable connector retainer.
7. Turn out 4 screws of fastening of the electric motor in the case of a mirror, pull out a cable and remove the electric motor.
Assembly
1. Install the cable, put the motor into the mirror body and fix it with screws.
2. Pull the cable harness through the hinge housing and install and tighten the Torx screws.
3. Install the hinge trim and secure.
4. Position the cable and secure it with the toothed washer.
5. Install the retainer on the connector block.
6. Install the rear view mirror.
EXTERIOR PARTS, REPAIR WORKS, Rear-view mirror - exterior.
7. Reinstall the rear view mirror glass.
EXTERIOR PARTS, REPAIR WORKS, Rear-view mirror - exterior.
Comments on this article