Dismantling
1. Release the sun visor from the retainer.
2. Carefully release and remove the trim from the sun visor support.
3. Remove the 3 Torx screws securing the shield.
4. Disconnect the connector block and remove the shield.
5. Turn out the screw of fastening of a clamp of a sun-protective peak to a roof and remove a clamp.
Assembly
1. Install the sun visor retainer and secure it with the screw.
2. Position the sun visor and connect the connector block.
3. Install the sun visor and attach it to the roof with screws.
4. Attach the sun visor to the retainer.
5. Install the trim on the visor support.
Comments on this article