Lower D-pillar trim (Range Rover 3)

Dismantling

1. Remove the small items tray.

2. Release the rear seat and fold the seat forward.

3. Remove enough of the door frame seal from the D-pillar to allow access to the top trim of the D-pillar.



4. Release the upper D-pillar trim from the upper clips.



5. Remove the 2 Torx screws securing the top of the lower trim. Release the mounting pins on the bottom of the trim and remove the trim.

Assembly

1. Install the cover plate and secure it with Torx screws.

[The original article is located on the website: LRMAN.RU]

2. Install the upper D-pillar trim into place.

3. Check how the rear seat belt works.

4. Replace the door frame seal.

5. Rotate the seat to its normal position.

6. Replace the small items tray.