Dismantling
1. Open the glasses compartment, remove the 2 screws securing the overhead console and release the console from the ceiling panel.
2. Disconnect blocks from sockets of switches and a plafond of lighting. Remove the console assembly.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
3. Remove the dome light from the console.
4. Remove the switches from the console.
5. Remove the 2 clips from the console.
Assembly
1. Install the brackets on the console.
2. Install the switches on the console.
3. Install the cover in the console.
4. Position the console and attach the connector blocks.
5. Place the console on the ceiling panel and tighten the fixing screws.
6. Close the glasses compartment.
Comments on this article