Dismantling
1. Remove the screw securing the side panel to the control panel.
2. Loosen the 2 retainers securing the side panel and separate it from the bottom of the control panel.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
3. Turn out 6 screws of fastening of a decorative overlay of the lateral panel. Remove the decorative trim.
4. Remove the cushion pad.
5. Remove 2 pad retainers.
Assembly
1. Install the clips on the decorative trim.
2. Install shock absorber.
3. Install the trim and secure it with screws.
4. Replace the side panel, tighten the screw and secure in the latches.
Comments on this article