Dismantling
1. Remove the end panel of the control panel.
CAR INTERIOR PARTS, REPAIR WORKS, End panel - control panel.
2. Remove the bottom side body panel.
VEHICLE INTERIOR PARTS, REPAIR WORKS, Control panel lower shield - passenger side.
3. Remove the left bottom rack trim "A".
CAR INTERIOR PARTS, REPAIR WORKS, Foot support frame - left hand drive.
4. Remove the cover from the bottom trim of the control panel to access the Torx screw.
5. Remove the 3 Torx screws securing the top trim to the control panel.
6. Disconnect the OBD connector block if the system is installed on the vehicle.
7. Remove a decorative overlay.
8. Remove the clips from the control panel overlay.
Assembly
1. Install the clips on the control panel overlay.
2. Attach the OBD connector block.
3. Place the trim on the control panel and secure it with screws.
4. Install the bottom trim cover.
5. Establish the lower overlay of the left rack "A".
CAR INTERIOR PARTS, REPAIR WORKS, Foot support frame - left hand drive.
6. Reinstall the lower side body panel.
VEHICLE INTERIOR PARTS, REPAIR WORKS, Control panel lower shield - passenger side.
7. Install the end panel of the control panel.
CAR INTERIOR PARTS, REPAIR WORKS, End panel - control panel.
Comments on this article