Lower Control Panel Trim, Passenger Side (Range Rover 3)

Dismantling

1. Remove the control panel end panel.

CAR INTERIOR PARTS, REPAIR WORK, End panel - control panel.

2. Remove the right lower trim of the "A" pillar.

CAR INTERIOR PARTS, REPAIR WORK, Trim - pillar "A" - lower.

3. Remove the lower side body panel from the passenger side.

CAR INTERIOR PARTS, REPAIR WORK, Lower control panel shield - passenger side.

4. Remove the cover from the lower control panel trim to access the Torx screw.

5. Remove the 3 Torx screws securing the top cover to the control panel.

6. Remove the decorative trim.

7. Remove the clips from the control panel trim.

Assembly

1. Install the clips onto the control panel trim.

The original text can be found at LRMAN.ru

2. Install the cover on the control panel and secure it with screws.

3. Install the bottom cover.

4. Install the passenger side lower body panel.

CAR INTERIOR PARTS, REPAIR WORK, Lower control panel shield - passenger side.

5. Install the "A" pillar trim.

CAR INTERIOR PARTS, REPAIR WORK, Trim - pillar "A" - lower.

6. Install the control panel end panel.

CAR INTERIOR PARTS, REPAIR WORK, End panel - control panel.