Dismantling
1. Disconnect "negative" battery terminal.
2. Disconnect the generator.
3. Remove all parts and assemblies that are dismantled when replacing the threshold and sections "V/S" center pillar of the side panel of the body.
REPAIR WORKS, Body side panel - sill and sections "V/S" central rack.
Repair work
1. Remove damaged panels, prepare joint edges and install new panels in accordance with the Body Panel Repair Code. Punch or drill holes in the panel to be installed for the cork weld as shown.
If the front sill reinforcement panel is not being replaced, the B-pillar reinforcement panel must be cut at the location indicated by the dotted line in the figure.
Assembly
1. Reinstall all parts and assemblies that are dismantled when replacing the threshold and sections "V/S" center pillar of the side panel of the body.
REPAIR WORKS, Body side panel - sill section.
2. Connect the generator.
3. Attach "negative" battery terminal.
Comments on this article