Antenna signal booster (Range Rover 3)

Removal

1. Remove the hatch located in the trunk on the left side.



2. Disconnect the connector from the amplifier.

3. Disconnect the coaxial wire.

4. Loosen the nut and disconnect the coaxial wire.

5. Remove the Torx screw securing the amplifier.

6. Disconnect the connector and remove the amplifier.

Installation

1. Install the amplifier and connect the connector.

2. Install the amplifier and tighten the Torx mounting screw to 6 Nm.

3. Connect the coaxial cables.

4. Connect the wiring harness.

5. Install the hatch back into place.

(See the source on the website: «LRMAN.ru»)