Fuel Blower Heater (FBH) Receiver (Range Rover 3)

Dismantling

1. Disconnect the negative battery terminal.

2. Remove the hatch located in the trunk on the right side.

3. Remove the warning triangle.



The original article is located on: www.LRman.ru

4. Remove the wiring harness retaining strap.

5. Loosen the 2 wiring harness clamps.

6. Unscrew the 3 bolts securing the fuse box to the body.



7. Loosen the nut and disconnect the coaxial cable.

8. Disconnect the connector from the receiver.

9. Unscrew the receiver mounting nut and remove the receiver.

Assembly

1. Install the receiver and secure it with the nut.

2. Connect the connector to the receiver.

3. Connect the coaxial cable and tighten the nut to 2 N·m.



4. Install the fuse box and tighten the bolts to 6 N·m.

5. Replace the wiring harness and secure it.

6. Install and secure the emergency installation sign.

7. Install the hatch back into place.

8. Connect the negative battery terminal.