Parts that protect threaded connections from loosening (Range Rover 3)

General remarks

Always replace locking devices with absolutely identical ones.

Lock washers with bendable tabs

Always replace the fold-over tab washers with new ones when reassembling. Do not reuse these lock washers.

Lock nuts

When loosening or tightening lock nuts, brake line nuts and fuel line nuts, always use two wrenches.

Cylindrical pins

When replacing a pin, the new pin must be selected according to the diameter of the mating hole in the part.

Retaining rings

When installing new snap rings, select them according to the groove size.

Keys and keyways

Remove burrs from the edges of the keyway using a fine-cut file. Clean the keyway thoroughly before reinstalling the key.

[The article was copied from the website: LRMAN.RU]

Clean and inspect the key. The key is suitable for reinstallation only if it is indistinguishable from a new one. Any defects indicate wear has begun.

Locking pins

When installing new cotter pins, select them according to the size of the hole in the bolt or stud.