Removing
1. Remove the center seat.
For more information refer to Rear Seat - Vehicle Included: 40/20/40 Split Seat (78.10.70/78.10.71)
2. Release the seat belt pretensioner cover and guide
- Remove 2 screws.
- Remove the seat belt guide.
- Remove the pretensioner cover.
3. Remove the lower seat belt anchor.
- Tilt the left outer rear seat forward.
- Remove and discard the Torx head bolt.
4. Remove the seat belt pretensioner assembly. Remove and discard the Torx head bolt.
Installation
1. Install the seat belt pretensioner assembly. Tighten a new Torx head bolt (tightening torque 40 Nm).
2. Install the seat belt pretensioner cover and seat belt guide.
- Attach the seat belt pretensioner cover and seat belt guide.
- Tighten the screws.
- Tighten a new nut (tightening torque 40 Nm).
- Lower the seat cushion.
For more information refer to Rear Seat - Vehicle Included: 40/20/40 Split Seat (78.10.70/78.10.71)
Comments on this article