External tailgate lock (Range Rover 3)

Dismantling

1. Open the upper and lower tailgate.

2. Remove the 2 Torx screws and remove the lock.

Assembly

1. Install the lock assembly, make sure the actuator is connected to the lock. Install the Torx screws and tighten them to 25 N·m.

The material was taken from the specified website: lrman.ru

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article review: Platon Fedorov

Adjusting the position of the lower tailgate
Adjusting the upper tailgate
Front door glass
Rear door glass
Fixed rear door glass
Front door window lifter
Rear door window lifter
External seal of the front door window opening

Current article

External tailgate lock

External decorative trim for front door
External decorative trim for rear door
Front door exterior handle

Comments on this article

No comments yet

Range Rover 3