Front door glass (Range Rover 3)

Dismantling

1. Lower the door glass.

2. Remove the plastic shield from the door panel.

DOORS, REPAIR WORK, Plastic shield of the door panel - front door.

[The original article can be found here lrman.ru]

3. Loosen the two Torx screws securing the glass to the window regulator.

4. Remove the glass.

Assembly

1. Install the glass on the window regulator.

2. Lightly tighten the Torx screws.

3. Turn on the window lift, check the position of the glass, adjust if necessary.

4. Tighten the glass mounting Torx screws to 10 Nm.

5. Install the door panel plastic shield.

DOORS, REPAIR WORK, Plastic shield of the door panel - front door.