Front seat (Range Rover 3)

Before disconnecting the battery, make sure that all requirements and conditions contained in the section on disconnecting the battery are met.

GENERAL INFORMATION, Precautions when working with electrical equipment.

Dismantling

1. Raise the seat cushion.



2. Remove the screw securing the seat belt to the front seat.

3. Remove the nut plugs and unscrew the 2 front seat mounting nuts.

4. Move the seat forward.

5. Follow all safety rules when working with passive safety systems.

GENERAL INFORMATION, Safety precautions when working with the airbag system (SRS).

WARNING: Always remove both battery terminals before operating Passive Safety systems (SRS). First disconnect the "negative" terminal. Never mix up the wires when connecting to the battery pack.

6. Release the seat cable connector from the support and disconnect it from the cable connector.



7. Remove the 2 rear seat mounting screws.

8. Protect the threshold from damage.

9. With the help of an assistant, carefully remove the seat from the vehicle.

Assembly

1. Install the front seat.

2. Tighten the nuts and screws securing the seat to a torque of 45 N·m.

3. Close the nuts with plugs.

4. Install the seat belt on the seat and tighten the fastening screw to a torque of 48 N·m.

5. Connect the battery terminals, the positive terminal first.

6. Move the seat back to its original position.