Back seat (Range Rover 3)

Dismantling

1. Cover the wheel arch liner to protect it.



2. Remove the 2 screws securing the rear seat.

3. Release the rear seat and fold it forward.



4. Disconnect the connector block from the seat.

5. Loosen the 2 seat mounting nuts and, with the help of an assistant, carefully remove the seat from the vehicle.

Assembly

1. Place the seat in the fully folded position and tighten the mounting nuts to a torque of 25 N·m.

2. Connect the connector to the seat connector.

3. Rotate the seat to its normal position.

4. Install the rear seat mounting bolts and tighten them to 25 Nm.