Rear Seat Armrest Front Trim (Range Rover 3)

Dismantling

1. Remove the armrest assembly.

SEATS, REPAIR WORK, Armrest - rear seat.

2. Release the lower cushion upholstery trim from the backrest frame.



3. Release the roller assembly from the 2 retaining latches and remove the roller.

4. Remove the 2 pins with cotter pins securing the left and right hinge pads.

5. Remove both covers from the hinges.



6. Release the Velcro to gain access to the screw securing the armrest to the seat back corner pad and remove the screw.



7. Carefully release the 11 fasteners securing the rear armrest trim to the front trim and remove the trim.



8. Carefully release the 7 armrest cover fasteners and remove the cover.

Assembly

1. Install the cover and secure it with the clamps.

2. Install both pads on the hinges and secure with pins.

3. Install the rear armrest cover and secure it with the clips.

4. Tighten the screw securing the rear armrest cover and secure the Velcro.

5. Position the roller assembly and secure it in the clamps.

6. Install and secure the lower bolster trim to the frame.

7. Reinstall the armrest assembly.

SEATS, REPAIR WORK, Armrest - rear seat.

The text of the article was taken from the website: lrman.ru