Front seat armrest (Freelander 2)

Removal

1. Remove the cover.

2. Unscrew the bolt with a Torx head.

Raise the seat armrest to the position shown.
Move the seat armrest toward the center of the vehicle.

CAUTION: Before removing the seat armrest, make sure the seat armrest groove is properly aligned. Failure to do so may result in damage to the vehicle.

CAUTION: Before removing the seat armrest, make sure the seat armrest groove is properly aligned.…

Installation

Install the components in the reverse order of disassembly.
Tighten the Torx head bolt to 10 N·m (7 ft·lbs).

[The original article can be found here: www.lrman.ru]

Tighten the Torx head bolt to 10 N·m (7 ft·lbs).

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article review: Roman Mitrofanov

Tightening torque specifications
Description and principle of operation
Front seat design
Manually adjustable front seats
Front electric seats without memory
Driver's seat with electric adjustment and memory
Heated front seats
Lumbar support

Current article

Front seat armrest

Front seat cushion
Front seat guide
Front seat guide motor
Front seat tilt motor
Electric motor for adjusting the backrest tilt
Front seat height adjustment motor
Front seat manual height adjustment lever
Front seat cushion upholstery

Comments on this article

No comments yet

Freelander 2

Freelander 1