Dashboard and car console Land Rover Freelander 2

Tightening torque specifications
Description Nm lb-ft Instrument panel : M8 bolts 24 18 Bolts M12 40 30 Instrument cluster console switch 3 2 Torx Head Dashboard Bolts 3 2 ECM Bracket 10 7

Description and principle of operation
Pos. Spare part number Name 1 - Steering column support 2 - Passenger airbag 3 - Cross beam 4 - Passenger Side Energy Absorbing Bracket - North American Specification (NAS) Vehicles Only 5 - Center...

Removal and installation the control panel
Removal 1. Secure the SRS system. Refer to procedure: Supplemental Restraint System (SRS) Depowering and Repowering (501-20, General Procedures). 2. Remove the windshield wiper motor. Refer to...

Upper section of the instrument panel
Removal 1. Secure the SRS system. 2. Remove both upper A-pillar trim panels. Refer to procedure: A-Pillar Trim Panel (501-05 Interior Trim, Removal and Installation). 3. Remove the center A-pillar...

Instrument panel console
NOTE: The removal procedure description may contain installation steps. Removal 1. If available. 2. 3. Tightening torque: 3 Nm CAUTION: When replacing a component, be careful not to damage adjacent...

Floor console
Removal 1. Remove the audio system control switches. Refer to the procedure: Additional audio system controls for rear-seat passengers (415-01 Infotainment system, Removal and installation). 2....

Upper console
Removal 1. 2. 3. NOTE: Do not perform further disassembly if the component is removed only for access. 4. Remove the passenger airbag deactivation indicator lamp. 5. Installation 1. When installing,...

Glove compartment
Removal 1. Move the front seat all the way back. 2. Open the glove compartment to the service position. 3. Remove the glove compartment. CAUTION: Do not use excessive force when detaching the glove...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Freelander 2

Freelander 1