Car Seat Repair Land Rover Freelander 2

Tightening torque specifications
Description Nm lb-ft Cushion frame bracket screw 45 33 Frame pretensioner bolt cushion 45 33 Front Seat Armrest Torx Head Bolt 10 7 Front Seat Control Switch Screws 1 1 Front seat cushion bolts 25 18...

Description and principle of operation
NOTE: Left-hand drive (LHD) model shown; the right-hand drive (RHD) version is similar. Pos. Spare part number Name 1 - Automatic Temperature Control (ATC) module 2 - Front seat heating control...

Front seat design
The front seat base is made from high-strength extruded steel and is designed to withstand loads exceeding current legal strength requirements. The seat base is shaped to prevent under-belt diving,...

Manually adjustable front seats
Pos. Spare part number Name A - Driver's seat B - Front passenger seat 1 - Seat back tilt wheel 2 - Seat height adjustment lever (driver seat only) 3 - Seat horizontal adjustment lever The manual...

Front electric seats without memory
Pos. Spare part number Name A - Driver's seat with electric adjustment without memory function B - Front passenger seat with electric adjustment without memory function The driver's seat without a...

Driver's seat with electric adjustment and memory
Pos. Spare part number Name 1 - Driver's seat switch block with position memory 2 - Seat control module The driver's power seat with memory is 6-way adjustable and includes the same controls as the...

Heated front seats
Pos. Spare part number Name 1 - Seat back heating element 2 - Seat cushion heating element 3 - Seat heating module Depending on vehicle specification, seat heating is available for both manual and...

Lumbar support
Pos. Spare part number Name A - Driver's seat lumbar support, manually adjustable B - Driver's seat electrically adjustable lumbar support Depending on vehicle specification, the driver's seat may...

Back seat
Pos. Spare part number Name 1 - ISOFIX anchorage points The rear seat is a 60/40 split configuration and features a design that allows the seat halves to be folded flat to increase cargo capacity. By...

Electrical seat control circuit without memory
NOTE: A = rigid connection; N = medium speed CAN bus; O = LIN bus. Pos. Spare part number Name 1 - Electric motor for horizontal adjustment of the driver's seat with electric drive without position...

Electrical seat control diagram with memory
NOTE: A = rigid connection; N = medium speed CAN bus; O = LIN bus. Pos. Spare part number Name 1 - Electric motor for horizontal adjustment of driver's seat with electric drive and position memory...

Front Seat Heating Control Circuit
NOTE: A = rigid connection; N = medium speed CAN bus; O = LIN bus. Pos. Spare part number Name 1 - ATC module 2 - Driver Seat Heating Control Module 3 - Passenger Seat Heating Control Module 4 - AJB...

Operating principles
Front seats with electric adjustment without memory The driver's seat without the position memory function works in all ignition power modes. The driver's seat without the position memory function...

Inspection and verification
CAUTION: Diagnostics by substituting a component from another vehicle is NOT permitted. Substituting control modules does not guarantee confirmation of the fault and, in addition, may cause...

Table of signs of malfunction
Sign of malfunction Possible reason Action There is no movement of the driver's seat by command from the driver's seat switch panel (including the position stored in memory is not activated) and...

DTC Trouble Code Index
NOTE: If a control module or component is suspected and the vehicle remains under manufacturer's warranty, refer to the warranty manual (subsection B1.2) before installing a new module/component, or...

Removal and installation the front seat
Removal 1. 2. 3. Disconnect the electrical connectors of the front seat wiring harness. Installation 1. Install the front seat using new bolts. Tightening torque: 40 Nm 2. Connect the electrical...

Front seat back upholstery
To prevent accidental deployment, the SRS control module backup power supply must be discharged. After disconnecting the battery ground cable(s), wait at least one minute before attempting to repair...

Front Seat Position Control Switch
Removal 1. 2. Installation 1. When installing, perform the removal procedure in reverse order.

Rear seat back upholstery
NOTE: This procedure involves removing and installing both rear seatbacks and the left rear seatback cover. Removing and installing the right rear seatback cover is similar. To avoid damaging the...

Front seat armrest
Removal 1. Remove the cover. 2. Unscrew the bolt with a Torx head. 3. Raise the seat armrest to the position shown. Move the seat armrest toward the center of the vehicle. CAUTION: Before removing...

Front seat cushion
NOTE: This procedure removes the seat cushion as a single unit. There is a separate procedure for removing the seat cushion trim. Removal 1. Tightening torque: 25 Nm Installation 1. When installing,...

Front seat guide
NOTE: The front seat fore/aft motor is supplied as part of the front seat lower frame assembly. Removal 1. Remove the front seat. For more information, refer to the chapter: Front Seat (501-10 Seat,...

Front seat guide motor
Removal 1. Lift the seat base to gain access. 2. Remove the drive cable. Disconnect the seat adjustment motor electrical connector. 3. Remove 2 clamps. 4. Remove the front seat runner motor....

Front seat tilt motor
NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. Remove the front seat. Refer to procedure: Front Seat (501-10 Seat, Removal and Installation). 2. 3....

Electric motor for adjusting the backrest tilt
NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. Remove the front seatback trim. Refer to the procedure: Front Seatback Trim (501-10 Seat, Removal...

Front seat height adjustment motor
NOTE: The front seat height adjustment motor is supplied as part of the front seat frame. NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. Remove the...

Front seat manual height adjustment lever
Removal 1. Remove the driver's side seat runner. For more information, refer to the chapter: Front Seat Guide (501-10 Seat, Removal and Installation). 2. Remove the front seat cushion base. For more...

Front seat cushion upholstery
NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. Remove the front seat cushion assembly. Refer to the procedure: Front Seat Cushion (501-10 Seat,...

Rear seat cushion upholstery
NOTE: Left rear seat cushion cover shown, same for right side. NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. 2. Installation 1. When installing,...

Front Seat Back Heating Mat
NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. Disconnect the battery ground cable. Refer to procedure: Specifications (414-00 Charging System -...

Front Seat Cushion Heater Mat
NOTE: The removal procedure descriptions in this manual may contain installation steps. Removal 1. Remove the front seat cushion cover. Refer to the procedure: Front Seat Cushion Cover (501-10 Seat,...

Rear seat cushion
Removal 1. Tightening torque: 25 Nm Installation 1. When installing, perform the removal procedure in reverse order.

Lumbar support assembly
Removal 1. Disconnect the battery ground cable. Refer to procedure: Specifications (414-00 Charging System - General Information, Specifications). 2. Place the SRS system in safe mode. Refer to...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Freelander 2

Freelander 1